Can You Wake Up Windows Computer Using A Mac Teamviewer
TeamViewer Wake On LAN You can turn on and off a computer using the LAN-on-LAN feature of TeamViewer. You can control the computer offline by remotely awakening before establishing a connection. You can start the wake-up request from another Windows or Mac computer, or even from an Android or iOS device running TeamViewer Remote Control. If the computer does not have a public address, you can also wake it up using another computer in its network. The other computer must be turned on and TeamViewer must be installed and configured for starting with Windows. If this is the case, you can activate Wake-on-LAN via the network in the TeamViewer options. TeamViewer is one example of a free remote access tool that supports Wake-on-LAN. Since TeamViewer is designed specifically for remote access, its WoL feature is convenient for those times when you need to your computer when idle, but forgot to turn it on before you left. TeamViewer can use Wake-on. If you’ve ever needed access to a sleeping device to grab a file, install an update, or fix an underlying IT issue, you know that remote access must be able to wake and restart the sleeping device. With TeamViewer, you can install updates or applications, restart the computer,. Can I wake up the Mac when it's in sleep mode so that it's offline to the outside world? Stack Exchange Network Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.
Wake-on-LAN (WOL) is an Ethernet networking standard that allows a shut down computer to be turned on remotely. Most recent motherboards that have an integrated Ethernet controller support this feature. You can enable the Wake-on-LAN feature in the Power Management section of the motherboard’s BIOS. Wake-on-LAN can turn on a computer on the same local area network or at another location via the internet.
This is how Wake-on-LAN works; the target computer is shut down with enough power reserved only for the network adapter to function. It listens for a small piece of incoming data called the “magic packet”. When the network adapter receives a valid magic packet, the computer starts up. This packet of data is 102 bytes consisting of “FF FF FF FF FF FF” followed by 16 repetitions of the listening network device’s MAC address.
Wake-on-LAN starts the computer from its “off” state and is like pressing the power button to turn it on and boot up as normal. It’s not to be confused with waking the computer up from standby or sleep. Here are several ways you can turn on a computer using Wake-on-LAN from within your local network or remotely over the internet.Wake-on-LAN over the Local Area Network
These tools will allow you to send the magic packet and start another computer in your local network.
1. Nirsoft WakeMeOnLan
WakeMeOnLan is another useful and portable utility from NirSoft that displays a list of computers on the network and allows you to switch one or all of them on with the click of a button. Scan the network by pressing F5 and it will display all connected computers. For a computer you want to send the magic packet to, either make sure it’s on before scanning or add it manually from the File menu (Ctrl+N).
Select the computer to start and click the Wake button (F8). The list of computers is saved and will be loaded the next time you start the program. Options like changing the port, sending the magic packet xx times, and the broadcast address can be changed in the settings. WakeMeOnLan has command line options and a computer can be started by either its IP address, name, MAC address or even the predefined text description you give it.
Windows Laptop
Download WakeMeOnLan
2. WakeOnLANx
WakeonLANx is a compact and portable tool that can perform a number of tasks in addition to Wake-on-LAN. These include pinging target computers, remote reboot/shutdown, retrieving last boot time, getting drive space usage or service status, starting a remote desktop connection, and creating a schedule for remote startups and shutdowns.
Adding a remote computer is not automatic and you have to do it manually. Click the Add button and supply either a MAC address only or IP address and then MAC address on the same line. Make sure to put a hash (#) before any MAC. For example, “#00-24-75-41-4F-9A” or “192.168.0.10#00-24-75-41-4F-9A” will work. The broadcast address and port can be changed by right clicking on any of the entries.
Download WakeOnLANx
3. FUSION WOL
This free utility dates back to 2005 but still works well. We’re not sure why it comes only as an installer because FUSION WOL is a 125KB standalone executable. As the tool has pretty much been abandoned by its developer, we’ve zipped up the file (and its help PDF) to make it portable.
You only need to supply a MAC address to turn on another computer. If you don’t know what that is, supply the IP address and click Get MAC. FUSION WOL has the ability to get the MAC address from an IP address, even if the target computer is off. The password box can be left blank unless you know one is needed. Entering an IP address at the bottom will tell you if the target computer is currently on or off.
Download Fusion WOL (Portable)
Wake-on-LAN over the Internet (Wake-on-WAN)
Make sure to configure your router to forward the required UDP port to the computer that you want to boot up or it will not work. Using a port such as 9 or 7 is recommended although you can use almost any port you wish. Refer to PortForward.com on how to configure port forwarding for your router.
4. Depicus Wake on Lan
Depicus Wake on Lan is a small and portable tool that is able to boot up a computer using Wake-on-LAN over the internet or over the local network.
Simply select Internet or Local subnet from the dropdown and enter the MAC address, IP address or host name, subnet mask (usually 255.255.255.255), and the port. If you are using Wake-on-LAN locally the internet address box doesn’t need to be filled.
Download Depicus Wake on Lan
5. SoftPerfect Network Scanner
Can You Wake Up Windows Computer Using A Mac Teamviewer 7
Sadly, Network Scanner went full shareware back in 2016 but the previous freeware version still works fine. This tool can perform a number of tasks such as scanning, pinging and getting detailed information about remote computers, discovering shared folders, and remote standby/shutdown. WOL is done via the Wake-on-LAN Manager, which you can get to from the toolbar or the Options menu.
To Wake-on-LAN via the internet, click Add and choose IPv4, enter the MAC address of the target computer, its external IP address and the port. Enter a host name instead of an IP address if you chose that option. To start a local computer you only have to add the MAC address and port, the target host can be left alone. You can also wake up a single computer with just its MAC address from the bottom of the WOL Manager.
Download SoftPerfect Network Scanner (Freeware version)
If you’re unable to remotely turn on your computer using any of the tools listed above, you need to make sure that your computer is Wake-On-LAN ready by checking your system settings. There’s also 5 more ways to remotely turn on a computer with Wake-on-LAN. Find out more on page 2.
12Next › View All You might also like:
5 Ways to Protect Your Computer Against NetCut’s ARP Spoofing Attack5 Tools to Automatically Wake Up Windows From Standby and Hibernation3 Ways to Remotely Start and Stop Services over the Network5 Ways to Remotely Access Apple Mac OS X from Windows5 Ways to Kill and View Processes on a Remote ComputerAdditionally, tools like Teamviewer, R-HUB remote support servers etc. also provide remotely turning on and accessing the computers. You can use the same.
ReplyHow you can wake up on LAN your PC if you’re not in the same network?
ReplyPage 2 might help you with that, those options can WOL over the internet which is essentially the same thing.
Replythis is “8 programms to use wake-on-lan to turn your computer on” describing exactly ONE way (WOL) – it is not 8 ways to turn a computer on … grrr :-P
ReplyWe called it 8 ways to… because there are not 8 programs or 8 websites, but a mixture. And you only have so many characters for a title.
Replyturn on and wake up is 2 completely different things. thats what he meant. Its clickbait in essence xD
ReplyWake on LAN will “turn on” your computer from off, wake up brings the computer out of sleep/standby. Two different things but “wake” is used for both.
Also, the commenter above did not mean the difference between turn on and wake, he was unhappy that the title says “8 ways…” when he believes there’s only one way mentioned.
ReplyThe PC that I wanted to start up has to be on Wi-Fi due to practicality. what I did was get one of those remote controlled smart outlets and set the BIOS to default to power on. I have a UPS and a gas generator so I’m not going to lose power to that PC otherwise. I just shut down the PC as normal then cut the power for about 30 seconds when I want to start it up.
Replyif the power to the network adapter is off while the computer is off, you need to be able to send a broadcast to it to wake it up.
in order to do that, an always on 3rd party device is needed that is in your home network like a tablet or old phone.
for that i wrote an app called wol proxy for android which can do the broadcast for you and still allow you to wake the PC:
play.google.com/store/apps/details?id=com.bianco.wolproxy&hl=en
ReplyHello, i am in brazil! Thanks ( Muito Obrigado!)
ReplySuper !!!!
Thanks a lot…
ReplyFor Android users – small app to wake up your PC
play.google.com/store/apps/details?id=ru.freask.pcwakeup
Description here develop.freask.ru/android/vklyuchenie-kompyutera-udalyonno-so-smartfona-na-android.html
It works even in cases where the computer behind the router NAT and port forwarding does not work (and it does not help if the PC is turned off).
thanks
ReplyThanks a lot for providing the information!
I really needed something like this so that I could manage turning on my desktop when I am in college, and fetching necessary files.
Cheers!
This is exactly what I was looking for for years. Thanks Raymond.
ReplyExcellent work! :)
We have been trying to implement this technology for our college project, and this article of yours was indeed helpful. :)
thank you i just recently know about wake on lan
Replyone of the best articles i’ve read recently… thank you very much!
ReplyHa I woke up all my school pcs by this thanks
ReplyGood article! I tested a WOL for my Asus system and it worked like a charm. Saved me driving an hour to turn the PC on!
Cheers!
ReplyWindows Computer Laptop
You are just a genius ….
Jeez….crazy
Replywow friend damn good, great for guys like me (net administrators)
Replyexcellent ! & Thanks
ReplyHi Raymond, this is really helpful. I was about to get a timer hardware to switch my office computer on and off at set timings. My only problem was I need to turn it on at times when the hardware is set to “off”. Have racked my brains over this…until I read what you’ve posted. A million thanks!
ReplyThanks my friend, your post was of great help. It saved me a lot of money. I was going to buy a remote power switch and “ATX push to on” from Deltronix. Thanks again.
ReplyVery informative, thank you so much! I’ve been looking for a way to turn my computer on from school + use logmein =)
ReplyHi, Ray
You are a great man.
How to instal wine on mac. WHAT A NICE THING!!!! YOU JUST SAVE ME LOT WORK HOURS, because someone have lost the keys of the server’s room, I had to work remotly, but, for a mistake turned off the server, but, I was able to turn it on again with the software Fusion WOL, thanks a lot for your advise.
ReplyNice article, I already use VNC to control my machine but sometimes I forget to leave my PC on. This will help a lot, the only thing I need now is a decent router which supports dynDNS.
ReplyVery cool!!! I used the wake up from the internet entered my home IP and MAC addy from my office and Voila! My home computer turned on. I used a remote support proggy to turn computer off and access everything THANKS!!!!!
ReplyGreat Post Buddy.
I blog it in my blog.
Thanks….
cool, thanks Ray!!
Replyvery helpful way Raymond good work
ReplyWell Mr Raymond,
Your site is really the Top!
I’ll be nearly 1 Year that I’m here as a member on this BLOG!
I’m really proud to be a member of Raymond blog.
Thanks for all!
Leave a Reply
Wake-on-LAN (WoL) is a network standard that allows you to remotely connect a computer, whether it is asleep, sleep, or even completely disconnected. It works by receiving the so-called “magic packet”, which is sent from the WoL client.
It also does not matter what operating system the computer will boot into (Windows, Mac, Ubuntu, etc.), you can use Wake-on-LAN to turn on any computer that receives a magic packet. The computer hardware must support Wake-on-LAN with a compatible BIOS and network interface card, so not every computer can automatically use Wake-on-LAN.
4 Steps total
Step 1: BIOS setup
The first thing you need to do to enable WoL is to set up the BIOS correctly so that the software can listen for incoming wake up requests.
Each manufacturer will have unique steps, so what you see below cannot accurately describe your installation. If these instructions do not help, find out your BIOS manufacturer and check their website for a user guide on how to enter the BIOS and find the WoL function.
1. Enter the BIOS instead of booting into your operating system.
2. Find a section that relates to power, for example, Power Management. This may be in the Advanced section. Other manufacturers may call it Resume On LAN, for example, on a Mac. On most BIOS screens, there is a help section on the side that describes what each setting does when it is turned on. It is possible that the name of the WoL parameter in your computer's BIOS is unclear.
3. Once you find the WoL setting, you can most likely press Enter to immediately switch it or show a small menu that allows you to turn it on and off, as well as turn it on and off.
4. Save the changes. This is not the same on every computer, but on many F10 keys it will persist and exit the BIOS. The bottom of the BIOS screen should give some instructions on saving and exiting.
Step 2: Installing WoL in the Windows operating system
Windows Wake-on-LAN is configured through the device manager. Here you can configure several settings:
1. Open the device manager.
2. Find and open the Network Adapters section. You can ignore any Bluetooth connections and virtual adapters. Double-click (or double-click) Network adapters, or select the small + or> next to it to expand this section.
3. Right-click or touch and hold the adapter belonging to the active Internet connection. Examples of what you can see are Realtek PCIe GBE Family Controller or Intel Network Connection, but it depends on your computer.
4. Select 'Properties'.
5. Open the Advanced tab.
6. In the 'Properties' section, click or select 'Wake Up By Magic Package.' If you cannot find it, go to step 8; Wake-on-LAN can still work.
7. Go to the menu value on the right and select “Enabled”.
8. Open the Power Management tab. It can be called Power, depending on your version of Windows or a network card.
9. Make sure these two options are on: allow this device to wake the computer and allow only the magic packet to wake the computer. Instead, these settings may be under the Wake-on-LAN section and be a single setting called the Wake on Magic Packet.
If you do not see these settings or they are inactive, try updating the network adapter device drivers; but remember that it is possible that your network card simply does not support WoL. This is most likely true for wireless network interface cards (NIC).
10. Click or tap OK to save the changes and exit this window. You can also close the device manager.
Step 3: How to use wake-on-lan
Izotope mac os high sierra. Now that the computer is fully configured to use Wake-on-LAN, you need a program that can send the magic packet that is required to start the run. TeamViewer is one example of a free remote access tool that supports Wake-on-LAN. Since TeamViewer is designed specifically for remote access, its WoL feature is convenient for those times when you need to your computer when idle, but forgot to turn it on before you left.
TeamViewer can use Wake-on-LAN in two ways. One of them is through the public IP address of the network, and the other is through another TeamViewer account on the same network (provided that this other computer is turned on). This allows you to wake up the computer without configuring the router ports (more on this below), since another local computer where TeamViewer is installed can relay the WoL request internally.
Another great Wake-on-LAN tool is Depicus, and it works from different places. You can use your WoL function through your website without downloading anything, but they also have a GUI and command line tool available for both Windows (free of charge) and MacOS, as well as for mobile applications Wake-on-LAN for Android and iOS.
Some other free Wake-on-LAN apps include Wake On LAN for Android and RemoteBoot WOL for iOS. WakeOnLan is another free WoL tool for macOS, and Windows users can also choose the Wake On Lan Magic packages.
Step 4: Troubleshoot wake-up problems over LAN
If you followed the steps above, it turned out that your device supports Wake-on-LAN without any problems, but when you try to turn on the computer it still does not work, you may also need to turn it on through the router. To do this, you need to log in to your router to make some changes.
A magic packet that runs on a computer is usually sent as a UDP datagram over port 7 or 9. If this is the case with the program that you use to send a packet, and you try to do it from outside the network, you need to open these ports on router and redirect requests to every IP address on the network.
Redirecting WoL magic packets to a specific client IP address will be meaningless, as the computer with the power off does not have an active IP address. However, since port forwarding requires a specific IP address, you must ensure that the port (s) are redirected to the so-called broadcast address so that it gets to each client computer. This address is in *. *. *.
For example, if you specify the IP address of your router as 192.168.1.1, use the address 192.168.1.255 as the forwarding port. If this is 192.168.2.1, you should use 192.168.2.255. The same is true for other addresses, such as 10.0.0.2, which will use the IP address 10.0.0.255 as the forwarding address.
You might also want to consider signing up for a Dynamic DNS (DDNS) service, such as No-IP. Thus, even if the IP address associated with the WoL network changes, DNS will update to reflect this change and still allow you to wake the computer. DDNS service is really useful only when you turn on the computer from outside the network, for example, from your phone when you are not at home.
References
- Wake-on-LAN setup
5 Comments
- Maceadrian_ych Mar 27, 2019 at 07:51am
Is this info not readily available ??
Then since you brought up WOL using Teamviewer (or other remote access software), are you very sure thats all you need to remotely power up a PC via the Internet ?
- CayenneCuber Mar 27, 2019 at 08:02am
'This allows you to wake up the computer without configuring the router ports (more on this below)'
- this part doesn't exist
- Thai PepperPeter (Action1) Mar 27, 2019 at 09:14am
Thanks for your review. I've modified a little bit this article.
- Cayennefuricle Mar 27, 2019 at 02:51pm
# original source from http://www.windowsitpro.com/article/networking/q-how-can-i-easily-send-a-magic-packet-to-wake-a-machine-on-my-subnet-
function wol {
param ([String]$MACAddrString = $(throw 'No MAC addressed passed, please pass as xx:xx:xx:xx:xx:xx'))
$MACAddr = $macAddrString.split(':') %{ [byte]('0x' + $_) }
if ($MACAddr.Length -ne 6)
{
throw 'MAC address must be format xx:xx:xx:xx:xx:xx'
}
$UDPclient = new-Object System.Net.Sockets.UdpClient
$UDPclient.Connect(([System.Net.IPAddress]::Broadcast),4000)
$packet = [byte[]](,0xFF * 6)
$packet += $MACAddr * 16
[void] $UDPclient.Send($packet, $packet.Length)
write 'Wake-On-Lan magic packet sent to $MACAddrString, length $($packet.Length)'
} - PoblanoReallyRosie May 12, 2019 at 02:41pm
Interesting! Thanks for posting that, I would never think to look there!